LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Repair procedures >> Disassembly

Repair procedures: Disassembly

  1. Remove the rear cover (A) after removing nuts (B).
    Fig 1: Removing Rear Cover
    G10533991Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the mounting bolts (A) and the regulator assembly (B).
    Fig 2: Removing Mounting Bolts And Regulator Assembly
    G10533992Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the slip ring guide (A) after pulling it.
    Fig 3: Removing Slip Ring Guide
    G10533993Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the OAD (Overrunning Alternator Decoupler) cap.
    NOTE:
    • When installing, replace with new OAD cap.
  5. Remove the OAD (Overrunning Alternator Decoupler) pulley (A) using the special tool.
    Fig 4: Removing OAD (Overrunning Alternator Decoupler) Pulley
    G10533994Courtesy of HYUNDAI MOTOR AMERICA
  6. Unsolder the 3 stator leads (A).
    Fig 5: Stator Leads
    G10533995Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the 4 through bolts (A).
    Fig 6: Through Bolts
    G10533996Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the rotor (A) and housing (B).
    Fig 7: Rotor And Housing
    G10533997Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals