LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Elantra GT Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Automatic Transaxle Control System - A6GF1) >> Shift Cable >> Repair procedures >> Adjustment

Repair procedures: Adjustment

WARNING: This page is about a different car, the 2016 Hyundai Elantra and 2015 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the shift lever in the interior, and the transmission manual control lever, to the N position.
  2. Connect the shift cable (B) to the shift lever (A).
    Fig 1: Connecting Shift Cable To Shift Lever
    G10538083Courtesy of HYUNDAI MOTOR AMERICA
  3. Lightly push the shift cable towards "F" to tighten the cable.
  4. Tighten the nut (A) to the specified torque.

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 2: Tightening Shift Cable Nut
    G10538084Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals