Repair Procedures: Installation

Install the #1, #2 cylinder bore water jacket separator (A).

Fig 1: No. 1 And 2 Cylinder Bore Water Jacket Separator
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the separator align with block inner side protrusion, and it must be located under the cylinder head installing surface.

Fig 2: Inserting Separator
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: LH/RH Cylinder Head Assembly And Gasket
Courtesy of HYUNDAI MOTOR AMERICA
Install the LH/RH cylinder head assembly and gasket.
(Refer to "CYLINDER HEAD ")