LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> ABS Does Not Operate >> Inspection Procedures >> DTC Inspection >> Check The Ground Circuit

Check The Ground Circuit

  1. Disconnect the connector from the ESC control module.
  2. Check for continuity between terminals 13, 38 of the ESC control module harness side connector and ground point.
    Fig 1: Checking Continuity Between ESC Control Module Harness Side Connector Terminals And Ground Point
    G10368234Courtesy of HYUNDAI MOTOR AMERICA
  3. Is there continuity?

    YES 

    • Check the wheel speed sensor circuit.

    NO 

    • Repair an open in the wire and ground point.