LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Fender >> Repair procedures >> Replacement

Repair procedures: Replacement

CAUTION:
  • Be careful not to damage the fender and body.
  • When removing the clips, use a clip remover.
  1. Remove the head lamps.

    (Refer to "HEAD LAMPS ")

  2. Loosen the mud guard mounting screws.
    Fig 1: Loosening Mud Guard Mounting Screws
    G10368302Courtesy of HYUNDAI MOTOR AMERICA
  3. After loosening the mounting screws and clips, then remove the side sill molding (A).
    Fig 2: Side Sill Molding
    G10368303Courtesy of HYUNDAI MOTOR AMERICA
  4. Using a screwdriver or remover, remove the fender garnish (A).
    Fig 3: Fender Garnish
    G10368304Courtesy of HYUNDAI MOTOR AMERICA
  5. Detach the clips and then remove the fender side cover (A).
    Fig 4: Fender Side Cover
    G10368305Courtesy of HYUNDAI MOTOR AMERICA
  6. Using a screwdriver or remover, remove the delta garnish (A).
    Fig 5: Delta Garnish
    G10368306Courtesy of HYUNDAI MOTOR AMERICA
  7. After loosening the mounting screws and bolt, then remove the front bumper side mounting bracket (A).
    Fig 6: Loosening Front Bumper Side Mounting Bracket Mounting Screws And Bolts
    G10368307Courtesy of HYUNDAI MOTOR AMERICA
  8. After loosening the fender mounting bolts and nut, then remove the fender (A).
    Fig 7: Fender, Bolts and nut
    G10368308Courtesy of HYUNDAI MOTOR AMERICA
  9. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals