Shift Cable Replacement

Remove the floor Interior console assembly.
(Refer to "INTERIOR (CONSOLE) ")
Remove the select cable snap pin (A) and the clip (B) from the select cable assembly.

Fig 1: Select Cable Snap Pin And Clip
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Removing Select Cable Snap Pin And Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the clip (A) from the shift cable assembly.
CAUTION: Set securely.

Fig 3: Shift Cable Assembly Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the retainer (A) and nuts (B-2ea).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 4: Retainer And Nuts (B-2ea)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the pins (A).
Remove the cable (B) from the cable bracket at manual transaxle assembly side.
Remove the shift cable and select cable at cabin room.

CAUTION: Insert securely.

Marking must be shown after assembly.

Fig 5: Cable Bracket Pins And Cable

Courtesy of HYUNDAI MOTOR AMERICA