Repair procedures: Adjustment

Install the selected cable (B) to the selected lever (A) of the manual transaxle in engine room.

Fig 1: Installing Selected Cable To Selected Lever
Courtesy of HYUNDAI MOTOR AMERICA
Assemble the shift lever assembly (A) to the vehicle body.

Fig 2: Shift Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Install the following items;
1. Insert the selected cable (A) to the shift lever assembly pin (B).
2. Install the snap pin (C).
3. Be careful the shift lever not to move left or right side, push the lock piece (D) until sounds.
4. You have to push in the adjust (E).
5. Remove the neutral position pin (F).

Fig 3: Selected Cable, Shift Lever Assembly Pin, Snap Pin And Neutral Position Pin

Courtesy of HYUNDAI MOTOR AMERICA