Repair procedures: Disassembly

Remove the rear cover (A).

Fig 1: Rear Cover
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Brush Holder Assembly And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the slip ring guide (A).

Fig 3: Slip Ring Guide
Courtesy of HYUNDAI MOTOR AMERICA
Remove the pulley (A) using the special tool.

Fig 4: Removing Pulley Using Special Tool
Courtesy of HYUNDAI MOTOR AMERICA
Remove solder from the 3 stator leads (A).

Fig 5: Stator Leads
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the 4 through bolts (A).

Fig 6: Through Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rotor (A) and bracket (B).

Fig 7: Rotor And Bracket
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse order of disassembly.