LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2016 >> Accent Sport, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering column upper and lower shrouds.

    (Refer to STEERING COLUMN AND SHAFT )

  3. Disconnect the ignition switch connector (B) and the key switch connector (A) from under the steering column.
    Fig 1: Disconnecting Ignition Switch Connector And Key Switch Connector From Under Steering Column
    G10363830Courtesy of HYUNDAI MOTOR AMERICA
  4. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder after pushing lock pin with key ACC.
Fig 2: Removing Key Lock Cylinder
G10363831Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals