LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Turbo R-Spec >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.6L T-GDI >> Accelerator Pedal >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Negative (-) Battery Cable.
  2. Disconnect the Accelerator Position Sensor Connector (A).
    Fig 1: Accelerator Position Sensor Connector (1 Of 3)
    G10604655Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Installation Bolt (B), the Nuts (C) and then remove the Accelerator Pedal Module.
Fig 2: Accelerator Pedal Module Installation Bolt (2 Of 3)
G10604656Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Accelerator Pedal Module Nuts (3 Of 3)
G10604657Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals