LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair procedures >> Removal >> Inspection

Repair procedures: Removal: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column.
    Fig 1: Identifying Ignition And Key Warning Switch Connectors
    G10606137Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not as specified, replace the switch.
    Fig 2: Ignition Switch Terminal Continuity Chart
    G10606138Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals