LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transaxle Control System - 1.6L T-GDI) >> Control Cable >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check operation of Lever of the T/M side when operating Shift Lever after assembly.
  2. When Shift Lever is to "R" position, check the position of "Skirt".
  3. When Lever is shifted to each position and if stop occurs between two positions, re-adjust Select Cable.

    (Refer to: Control Cable - "SELECT CABLE ADJUSTMENT ")

scientia non olet · About LEMON Manuals