LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B, C) from the fuel tank air filter and canister close valve.
    Fig 1: Identifying Canister Close Valve Connector
    G10631606Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank air filter and canister close valve assembly (A) after removing the mounting nut (B).
    Fig 2: Identifying Canister Close Valve Assembly And Mounting Nut
    G10631607Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 3: Identifying Lever
    G10631608Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Separating Canister Close Valve From Fuel Tank Air Filter
    G10631609Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals