Repair procedures: Replacement

Remove the front wheel & tire.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

NOTE: Be careful not to damage to the hub bolts when removing the front wheel & tire.
Remove the brake hose (A) & wheel speed sensor bracket (B) from the front strut assembly by loosening mounting bolts.

Fig 1: Brake Hose And Wheel Speed Sensor Bracket With Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.
Tightening torque:

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Fig 2: Stabilizer Link And Front Strut Assembly With Nut
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the front strut assembly (A) with the knuckle by loosening the bolt & nut.
Tightening torque:

137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Fig 3: Front Strut Assembly With Bolt And Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the front strut assembly and than loosen the strut mounting nuts (A).
Tightening torque:

44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft)

Fig 4: Strut Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.