Repair procedures: Removal

Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the airbag module mounting bolts (2EA).

Fig 1: Airbag Module Mounting Bolts (2EA)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the wiring fixing clip (C) and disconnect the horn connector (A).

Fig 2: Wiring Fixing Clip And Horn Connector
Courtesy of HYUNDAI MOTOR AMERICA
Release the connector locking pin, then disconnect the driver airbag module connector (B).
CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
Remove the steering wheel and steering wheel column cover. (Refer to "STEERING COLUMN AND SHAFT ")

Fig 3: Steering Wheel And Steering Wheel Column Cover Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the clock spring and horn connector, then remove the clock spring.

Fig 4: Clock Spring And Horn Connector
Courtesy of HYUNDAI MOTOR AMERICA