Repair procedures: Removal

Remove the following items;
1. Sub frame assembly
  (Refer to "FRONT CROSS MEMBER ")
2. Drive shaft assembly.
  (Refer to "FRONT DRIVESHAFT ")
Remove the propeller shaft (A).
Tightening torque:

49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft)

Fig 1: Propeller Shaft Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer upper & lower mounting bolts. (transfer side transaxle side)

Fig 2: Transfer Upper Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Transfer Lower Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer lower mounting blot. (transaxle side transfer side)

Fig 4: Transfer Lower Mounting Bolt

Courtesy of HYUNDAI MOTOR AMERICA