LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Front Wheel Transfer Assembly >> Repair procedures >> Installation

Repair procedures: Installation

  1. Install in the reverse order of removal.
NOTE:
  1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
  2. Smear and cover splines (B) with molybdenum type high pressure grease.

    TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

    Fig 1: O-Ring And Cover Splines
    G10611836Courtesy of HYUNDAI MOTOR AMERICA
  3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
Fig 2: Runout Marking On Propeller Shaft
G10611837Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals