LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 2.0L >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn Ignition switch OFF.
  2. Remove the Air Duct.

    (Refer to Engine Mechanical System - "Air Cleaner").

  3. Disconnect the Solenoid Valve Connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G10611747Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals