LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Wheel Alignment >> Tire >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove valve core and deflate the tire.
  2. Remove the side of the tire bead area from the wheel using tire changing machine.
    Fig 1: Removing Side Of Tire Bead Area From Wheel Using Tire Changing Machine
    G10612152Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
    • Avoid tire/tool contact with the valve on dismount.
    • Dismount should end near the valve.
  3. Rotate the wheel clockwise.
Fig 2: Removing Tire (1 Of 2)
G10612153Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Removing Tire (2 Of 2)
G10612154Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals