Toe adjustment: Notes
- Loosen the tie rod end lock nut.
- Remove the bellows clip to prevent the bellows from being twisted.
- Adjust the toe by screwing or unscrewing the tie rod. Toe adjustment should be made by turning the right and left tie rods by the same amount.
Toe
Total: 0.1 ± 0.2
Individual: 0.05 ± 0.1
Tie rod Turning direction Toe LH (Driver's side) Reward Decrease (Toe in) Forward Increase (Toe out) RH Reward Increase (Toe out) Forward Decrease (Toe in) - When completing the toe adjustment, install the bellows clip and tighten the tie rod end lock nut to specified torque.
Tightening torque:
49.0 ~ 53.9 N.m (5.0 ~ 5.5 kgf.m, 36.2 ~ 39.8 lb-ft)