LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B, C) from the fuel tank air filter and canister close valve.
    Fig 1: Identifying Fuel Tank Air Filter Ventilation Hoses
    G10611558Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank air filter and canister close valve assembly (A) after removing the mounting nut (B).
    Fig 2: Identifying Fuel Tank Air Filter And Canister Close Valve Assembly
    G10611559Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
Fig 3: Identifying Canister Close Valve Lever
G10611560Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Separating Canister Close Valve From Fuel Tank Air Filter
G10611561Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals