Rear Power Window Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the rear door trim.
(Refer to "REAR DOOR ")
Remove the rear power window switch module (A).

Fig 1: Rear Power Window Switch Module Connector Terminals
Courtesy of HYUNDAI MOTOR AMERICA
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
[Seat Heater]

Fig 2: Power Window Switch Terminal Continuity Chart (Seat Heater)
Courtesy of HYUNDAI MOTOR AMERICA

[General]

Fig 3: Power Window Switch Terminal Continuity Chart (General)
Courtesy of HYUNDAI MOTOR AMERICA