Main Power Window Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim and power window switch.
(Refer to "FRONT DOOR ")
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
[LHD]

Fig 1: Front Door Trim And Power Window Switch Connector Terminals (LHD)
Courtesy of HYUNDAI MOTOR AMERICA

[RHD]

Fig 2: Front Door Trim And Power Window Switch Connector Terminals (RHD)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Power Window Switch Terminal Continuity Chart
Courtesy of HYUNDAI MOTOR AMERICA

[Driver Auto Up/Down]

Fig 4: Power Window Switch Terminal Continuity Chart (Driver Auto Up/Down)
Courtesy of HYUNDAI MOTOR AMERICA