Cluster Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the cluster fascia panel (A).

Fig 1: Identifying Cluster Fascia Panel
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the cluster fascia lower panel (A).

Fig 2: Identifying Cluster Fascia Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the cluster (A).

Fig 3: Loosening Cluster Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (B).

Fig 4: Identifying Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.