Audio Assembly Replacement

CAUTION:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the center fascia panel (A).

Fig 1: Identifying Center Fascia Panel
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the hazard lamp switch assembly (A).

Fig 2: Identifying Hazard Lamp Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (B).

Fig 3: Identifying Connectors
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the audio assembly (A).

Fig 4: Loosening Audio Assembly Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors.

Fig 5: Identifying Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order the removal.
NOTE:
- Make sure the connectors are plug-in in properly.