LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
    Fig 1: Key Warning Switch Connector Terminals
    G10613535Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Ignition Switch Connector Terminals
    G10613536Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
Fig 3: Ignition Switch Connector Terminals Continuity Chart
G10613537Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals