Interior 2 Antenna

Disconnect the negative (-) battery terminal.
Remove the floor console rear panel (A) using the appropriate tool.

Fig 1: Identifying Floor Console Rear Panel
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Take care not to damage and scratch the floor console rear panel and its related parts.
Take care not to damage the hook when removing the floor console rear panel.
After loosening the antenna nuts (2EA) and connector, remove the interior 2 antenna (A).

Fig 2: Loosening Antenna Nuts, Locating Connector & Interior 2 Antenna
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Release the connector lock (A) as indicated by the arrow shown in illustration, and then push-down the lock.
Make sure the connector is locked completely when installing.

Fig 3: Releasing Connector Lock
Courtesy of HYUNDAI MOTOR AMERICA