Interior 1 Antenna

Disconnect the negative (-) battery terminal.
Remove the seat heater switch assembly.
(Refer to the "SEAT HEATER ")
After loosening the antenna nuts (2 EA) and connector (B), remove the interior 1 antenna (A).

Fig 1: Loosening Antenna Nuts, Locating Connector & Interior 1 Antenna
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Release the connector lock (A) as indicated by the arrow shown in illustration, and then push-down the lock.
Make sure the connector is locked completely when installing.

Fig 2: Releasing Connector Lock
Courtesy of HYUNDAI MOTOR AMERICA