Smart Key Code Saving

WARNING: This page is about a different car, the 2017 Hyundai Sonata and 2016 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.

Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.

Fig 1: Locating Data Link Connector
Courtesy of HYUNDAI MOTOR AMERICA
Select the vehicle model and then do "Smart Key Code Saving".

Fig 2: Screen Display - Smart Key Code Saving
Courtesy of HYUNDAI MOTOR AMERICA
After selecting "Smart Key Teaching" menu, push "Enter" key, then the screen will be shown as below.

Fig 3: Screen Display - Smart Key Teaching
Courtesy of HYUNDAI MOTOR AMERICA
After having the teaching smart key, push "ENTER" key.
Input the "Pin Code" for first key teaching.

Fig 4: Screen Display - Input Pin Code For First Key Teaching (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Screen Display - Input Pin Code For First Key Teaching (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Press the SSB with smart key within 5 sec after pressing "OK".

Fig 6: Screen Display - SSB With Smart Key Within 5 Sec
Courtesy of HYUNDAI MOTOR AMERICA
Confirm the message "First Key Teaching Completed".

Fig 7: Screen Display - Message First Key Teaching Completed
Courtesy of HYUNDAI MOTOR AMERICA
Press the SSB with smart key within 5 sec after pressing "OK".

Fig 8: Screen Display - SSB With Smart Key Within 5 Sec
Courtesy of HYUNDAI MOTOR AMERICA
Confirm the message "Second Key Teaching Completed".

Fig 9: Screen Display - Message Second Key Teaching Completed
Courtesy of HYUNDAI MOTOR AMERICA
Then the screen will be shown as below when key teaching process is completed.

Fig 10: Screen Display - Key Teaching Process Completed

Courtesy of HYUNDAI MOTOR AMERICA