General Information (Fuel System) (HEV): Specifications: Notes

Items	Specification
Fuel Tank	Capacity	65 lit. (17.2 U.S. gal., 68.7 U.S. qt., 57.2 Imp. qt.)
Fuel Filter	Type	Paper Type
Fuel Pressure Regulator	Regulated Fuel Pressure	333 ~ 353 kPa (3.4 ~ 3.6 kgf/cm2 , 48.3 ~ 51.2 psi)
Fuel Pump	Type	Electrical, in-tank type
	Driven by	Electric motor

Sensors 

Manifold Absolute Pressure Sensor (MAPS)

Type: Piezo-resistive pressure sensor type

Pressure (kPa)	Output Voltage (V)
20.0	0.79
46.7	1.84
101.3	4.0

Intake Air Temperature Sensor (IATS)

Type: Thermistor type

Temperature [°C (°F)]	Resistance (k Ω)
-40 (-40)	40.93 ~ 48.35
-20 (-4)	13.89 ~ 16.03
0 (32)	5.38 ~ 6.09
10 (50)	3.48 ~ 3.90
20 (68)	2.31 ~ 2.57
40 (104)	1.08 ~ 1.21
50 (122)	1.56 ~ 1.74
60 (140)	0.54 ~ 0.62
80 (176)	0.29 ~ 0.34

Engine Coolant Temperature Sensor (ECTS)

Type: Thermistor type

Temperature [°C (°F)]	Resistance (k Ω)
-40(-40)	48.14
-20(-4)	14.13 ~ 16.83
0(32)	5.79
20(68)	2.31 ~ 2.59
40(104)	1.15
60(140)	0.59
80(176)	0.32

Throttle Position Sensor (TPS) [integrated into ETC Module]

Type: Variable resistor type

Throttle Angle (°)	Output Voltage (V)
	TPS1	TPS2
0	0	5.0
10	0.48	4.52
20	0.95	4.05
30	1.43	3.57
40	1.90	3.10
50	2.38	2.62
60	2.86	2.14
70	3.33	1.67
80	3.81	1.19
90	4.29	0.71
100	4.76	0.24
105	5.0	0
C.T (6~15°)	0.29 ~ 0.71	4.29 ~ 4.71
W.O.T (93~102°)	4.43 ~ 4.86	0.14 ~ 0.57

Item	Resistance (kΩ)
TPS1	0.875 ~ 1.625 [20°C (68°F)]
TPS2	0.875 ~ 1.625 [20°C (68°F)]

Crankshaft Position Sensor (CKPS)

Type: Hall effect type

Camshaft Position Sensor (CMPS)

Type: Hall effect type

Knock Sensor (KS)

Type: Piezo-electricity type

Item	Specification
Capacitance (pF)	850 ~ 1,150

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]

Type: Zirconia (ZrO2) [Linear] Type

Item	Specification
Heater Resistance (Ω)	2.5 ~ 4.0 [20°C (68°F)]

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]

Type: Zirconia (ZrO2) [Binary] Type

A/F Ratio (λ)	Output Voltage (V)
RICH	Approx. 0.9
LEAN	Approx. 0.04

Item	Specification
Heater Resistance (Ω)	3.3 ~ 4.1 [21°C (69.8°F)]

Accelerator Position Sensor (APS)

Type: Variable resistor type

Accelerator Position	Output Voltage (V)
	APS1	APS2
C.T	0.7 ~ 0.8	0.29 ~ 0.46
W.O.T	3.85 ~ 4.35	1.93 ~ 2.18

Fuel Tank Pressure Sensor (FTPS)

Type: Piezo - Resistivity type

Pressure [kPa (kgf/cm2 , in H2O)	Output Voltage (V)
-6.67 (-0.068, -26.8)	0.5
0	2.5
+6.67 (0.068, 26.8)	4.5

Natural Vacuum Leakage Detection (NVLD)

Item	Current (mA)
	Switch open	Switch close
Power supply	Approx. 2.0	Approx. 3.0
Data line	Approx. 10.0	-

Actuators 

Injector

Item	Specification
Coil Resistance (Ω)	13.8 ~ 15.2 [20°C (68°F)]

ETC Motor [integrated into ETC Module]

Item	Specification
Coil Resistance (Ω)	1.2 ~ 1.8 [20°C (68°F)]

Purge Control Solenoid Valve (PCSV)

Item	Specification
Coil Resistance (Ω)	19.0 ~ 22.0 [20°C (68°F)]

CVVT Oil Control Valve (OCV)

Item	Specification
Coil Resistance (Ω)	6.9 ~ 7.9 [20°C (68°F)]

Ignition Coil

Type: Stick type

Item	Specification
1st Coil Resistance (Ω)	0.62 ± 10% [20°C (68°F)]
2nd Coil Resistance (kΩ)	7.0 ± 15% [20°C (68°F)]

Canister Close Valve (CCV)

Item	Specification
Coil Resistance (Ω)	19.8 ~ 21.8 [20°C (68°F)]

SOC state	Ignition timing (°)	Lever position	Idle RPM
SOC 40%	BTDC 21° ± 10°	D, N, P-Range	1700 ± 100 RPM
SOC 42%	BTDC 18° ± 10°	D, N, P-Range	1500 ± 100 RPM
SOC 43%	BTDC 15° ± 10°	D, N, P-Range	1300 ± 100 RPM