LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (HEV) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Disconnecting Crankshaft Position Sensor Connector
    G10588632Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the protector (A).
    Fig 2: Removing Protector
    G10588633Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Removing Bolt & Crankshaft Position Sensor
    G10588634Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals