LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (HEV) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING:
  • DON'T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur.

[Bank 1/Intake] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Disconnecting Connector, Removing Installation Bolt & CMPS - Bank 1/Intake
    G10588638Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Exhaust] 

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the hanger and the protector.
  4. Remove the installation bolt (B), and then remove the sensor.
    Fig 2: Disconnecting Connector, Removing Installation Bolt & CMPS - Bank 1/Exhaust
    G10588639Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals