LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Lift the vehicle.
  2. Disconnect the fuel filler hose (A).
  3. Disconnect the ventilation tube quick-connector (B).
    Fig 1: Fuel Filler Hose And Ventilation Tube Quick-Connector
    G10575010Courtesy of HYUNDAI MOTOR AMERICA
  4. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
    Fig 2: Filler-Neck Assembly Mounting Screw
    G10575011Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the rear-LH wheel, tire and the inner wheel house.
  6. Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).
    Fig 3: Filler-Neck Assembly Bracket Mounting Nuts
    G10575012Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals