Repair Procedures: Installation

Install the water jacket separator 1# (A) and 2# (B).

Fig 1: Water Jacket Separator 1 And Water Jacket Separator 2
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the separator align with block inner side protrusion, and it must be located under the cylinder head installing surface.

Fig 2: Inserting Groove
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Block Inner Side Protrusion
Courtesy of HYUNDAI MOTOR AMERICA
Install the LH/RH cylinder head assembly and gasket.
(Refer to "CYLINDER HEAD ")