LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Santa Fe XL Base >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch Assembly >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
    Fig 1: Key Warning Switch Connector And Terminals
    G10577260Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Ignition Switch Connector And Terminals
    G10577261Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    Fig 3: Ignition Switch Continuity Chart
    G10577262Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals