Repair procedures: Removal

Disconnect the negative (-) battery terminal.
After loosening the mounting screws, then remove the liftgate trim (A).
(Refer to "TAIL GATE ")

Fig 1: Liftgate Trim And Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Remove the liftgate latch assembly (A) after loosening the mounting bolts.

Fig 2: Liftgate Latch Assembly And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the PCU (Power Closing Unit) mounting nuts.

Fig 3: Power Closing Unit and Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the power liftgate latch connector (A) and PCU connector (B).

Fig 4: Power Liftgate Latch And Power Close Unit Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Remove the power liftgate latch & PCU assembly (A).

Fig 5: Power Liftgate Latch And Power Close Unit Assemblies
Courtesy of HYUNDAI MOTOR AMERICA