LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation tube quick-connector (B) from the fuel tank air filter and canister close valve.
    Fig 1: Identifying Canister Close Valve Connector
    G10587740Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the vapor tube quick-connector (A).
  6. Remove the canister assembly bracket (D) after removing the mounting bolts (B) and nut (C).
    Fig 2: Identifying Vapor Tube Quick Connector
    G10587741Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the canister bracket (B) installation bolt (A).
    Fig 3: Removing Canister Bracket
    G10587742Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the fuel tank air filter & canister close valve assembly (A) after rotating it in the direction of the arrow in the figure.
    Fig 4: Removing Fuel Tank Air Filter
    G10587743Courtesy of HYUNDAI MOTOR AMERICA
  9. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 5: Identifying Canister Close Valve Lever
    G10587744Courtesy of HYUNDAI MOTOR AMERICA
    Fig 6: Separating Canister Close Valve From Fuel Tank Air Filter
    G10587745Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals