Repair Procedures: Disassembly

Remove the alternator cover (A) using a screw driver after loosening the nuts (B).

Fig 1: Alternator Cover Nuts Location
Courtesy of HYUNDAI MOTOR AMERICA
Remove the slip ring guide (A) and then loosen the mounting bolts and disconnect the brush holder assembly (B).

Fig 2: Identifying Slip Ring Guide And Brush Holder Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Pulley (A) using the SST (09373-27000) (B).

Fig 3: Using Pulley And SST (09373-27000)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the 4 through bolts (A).

Fig 4: Alternator Through Bolts (4)
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rotor (A) and cover (B).

Fig 5: Alternator Rotor And Cover
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse order of disassembly.