LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Removal >> Rear Power Window Switch

Rear Power Window Switch

  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Rear Door Trim.

    (Refer to: Body - "REAR DOOR TRIM ").

  3. Remove the Power Window Switch Assembly (A) after loosening the Mounting Screws (3EA).
    Fig 1: Power Window Switch Assembly Mounting Screws
    G10584738Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for Continuity between the Terminals in each switch position according to the chart. If the continuity condition is not normal, replace the switch.
    Fig 2: Power Window Switch Assembly Terminal Continuity Chart
    G10584739Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals