LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Santa Fe GLS, FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD LOWER PANEL ")

  3. Remove the steering column upper and lower shrouds.

    (Refer to "STEERING COLUMN SHROUD PANEL ")

  4. Remove the ignition switch (A) after disconnecting the 6P connector (B).
    Fig 1: Ignition Switch And 6P Connector
    G10577263Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the key warning and immobilizer connector (A).
    Fig 2: Key Warning And Immobilizer Connector
    G10577264Courtesy of HYUNDAI MOTOR AMERICA
  6. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder with key ACC.
    Fig 3: Key Lock Cylinder
    G10577265Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals