Monitor Assembly Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the center fascia upper panel (A).

Fig 1: Center Fascia Upper Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 2: Center Fascia Upper Panel Connector
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the monitor assembly (A).

Fig 3: Monitor Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the monitor connector (A).

Fig 4: Monitor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector is connected properly.
- Replace any damaged clips.