Audio Unit Assembly Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the center fascia upper panel (A).

Fig 1: Center Fascia Upper Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 2: Center Fascia Upper Panel Connector
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the console upper cover (A).

Fig 3: Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the center fascia lower panel (A).

Fig 4: Center Fascia Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).
Upper

Fig 5: Center Fascia Lower Panel Upper Connectors
Courtesy of HYUNDAI MOTOR AMERICA

Lower

Fig 6: Center Fascia Lower Panel Lower Connectors
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the audio unit assembly (A).

Fig 7: Audio Unit Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the audio unit connectors (A).

Fig 8: Audio Unit Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector is connected properly.
- Replace any damaged clips.