Floor Console Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the console upper cover (A).

Fig 1: Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the parking brake cover (A).

Fig 2: Parking Brake Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the console tray mat (A).

Fig 3: Console Tray Mat
Courtesy of HYUNDAI MOTOR AMERICA
Remove the console extension side cover (A).
LH

Fig 4: Console Extension Side Cover - LH
Courtesy of HYUNDAI MOTOR AMERICA

RH

Fig 5: Console Extension Side Cover - RH
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws and bolts, then remove the floor console assembly (A).

Fig 6: Floor Console Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the floor console main connector (A).

Fig 7: Floor Console Main Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure all connectors are connected in properly.
- Replace any damaged clips.