Repair procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Genesis and 2015 Hyundai Genesis. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")
Remove the screws from the steering cover.

Fig 1: Removing Screws From Steering Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering back cover (A).

Fig 2: Removing Steering Back Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering remote control connector (A).

Fig 3: Steering Remote Control Connector (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Steering Remote Control Connector (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screws and remove the steering remote control (A).

Fig 5: Steering Remote Control Screws (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Steering Remote Control Screws (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA