LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Genesis Coupe 3.8 Ultimate, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the console upper cover (A).
    Fig 1: Console Upper Cover
    G10490261Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the center fascia lower panel (A).
    Fig 2: Center Fascia Lower Panel
    G10490262Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening 2 nuts and disconnecting the connectors.
    Fig 3: Body Control Module
    G10490263Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals