LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Equus Ultimate >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Sender Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. "Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Remove the fuel pump.

    (Refer to "FUEL PUMP ")

  4. Disconnect the fuel pump & sender ground (A).
    Fig 1: Fuel Pump And Sender Ground
    G10382759Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the fuel pump connector & fuel sender connector (A).
  6. Lift the fixing hook (B) by using a common driver, and then remove the fuel sender (C).
    Fig 2: Fixing Hook, Fuel Sender And Fuel Sender Connector
    G10382760Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Fuel Sender Assembly
    G10382761Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals