Repair procedures: Replacement

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the floor console armrest.
(Refer to "CONSOLE ARMREST ")
Loosen the mounting screws (A) located in the top of the rear console cover.

Fig 1: Rear Console Cover Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Fig 2: Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
IMPORTANT:
- Make sure the connector is connected properly.
- Replace any damage clips.