LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Sport, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair procedures >> Installation >> Inspection

Repair procedures: Installation: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column.
    Fig 1: Ignition Switch And Key Warning Switch Connectors
    G10531273Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    Fig 2: Ignition Switch And Key Warning Switch Connector Terminals Continuity Chart
    G10531274Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals