LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch System) >> Ignition Lock Switch >> Repair procedures >> Inspection >> Removal

Repair procedures: Inspection: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect ignition lock switch connector (A).
    Fig 1: Ignition Lock Switch Connector
    G10537833Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the ignition lock switch by loosening a nut (A).
    Fig 2: Ignition Lock Switch Nut
    G10537834Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals