Head Lamp Function In/Out List
| Function | Characteristics | Name | |
|---|---|---|---|
| Hardware Label | Spec. Designation | ||
| Input | Digital | L_HeadLampLowSW | Head Lamp Low Switch |
| L_AutoLightSW | Auto Light Switch | ||
| L_HeadLampHighSW | Head Lamp High Switch | ||
| L_IGN1 | Ignition1 power | ||
| L_EC_DRL_OPT | Dedicated DRL option Switch | ||
| CAN Communication | C_ALT_L | Engine is running | |
| C_SMKRKECMD | SMK RKE Command from Fob | ||
| C_DRVDRSW | Driver Side Door Open/Close Status | ||
| C_PARKING BRAKE SW | Parking Brake Switch Status | ||
| C_CANADA_DRLSts | DRL Option Switch | ||
| C_D_DRL_Act | Dedicated DRL ON/Off State | ||
| C_HLampLOW_Act | Head Lamp Low On/Off State | ||
| C_HLampHIGH_Act | Head Lamp High On/Off State | ||
| Internal | b_HeadAutoState | Head Lamp Low On/Off request by Auto Light Control Module | |
| Internal | b_KeyOff | L_KeyIn == Off & L_ACC == Off & L_IGN1 == Off & L_IGN2 == Off | |
| b_C_IGNSW | Same value with C_IGNSW (refer ECU spec.) | ||
| b_IGN | on: b_C_IGNSW == IGN ON off: b_C_IGNSW == KEY OFF || b_C_IGNSW == KEY IN || b_C_IGNSW ==ACC ON || b_C_IGNSW ==ST |
||
| b_ACC | on: b_C_IGNSW == ACC ON off: b_C_IGNSW == KEY OFF || b_C_IGNSW == KEY IN || b_C_IGNSW ==IGN ON || b_C_IGNSW ==ST |
||
| b_START | on: b_C_IGNSW == ST off: b_C_IGNSW == KEY OFF || b_C_IGNSW == KEY IN || b_C_IGNSW ==ACC || b_C_IGNSW ==IGN ON |
||
| b_HeadLampHighSW | This signal reserved for separated Head Lamp High input from Passing input | ||
| b_PassingSW | On: L_HeadLampHighSW==On Off: L_HeadLampHighSW==Off | ||
| b_HeadLampLowSWOn | On: L_HeadLampLowSW == On || (b_HeadAutoState == On & (b_IGN == On || b_START == On)) Off: L_HeadLampLowSW == Off & b_HeadAutoState == Off |
||
| b_LOCK | P_RKECMD == Lock || C_SMKRKECMD == Lock || C_PassiveLock == Lock |
||
| b_2LOCK | b_LOCK counter | ||
| b_Unlock | b_RKEUnLock==On || C_SMKRKECMD == UnLock || C_PassiveUnlock== UnLock |
||
| b_DRLOpt | DRL Option | ||
| Output | Digital | O_HeadLampLowCTRL | Head Lamp Low Output Status (Active Low) |
| Internal | b_Escort | Escort activation/deactivation Status | |
| b_HeadLampHighOutput | On: C_HeadLampHighON = OnOff: C_HeadLampHighON = Off | ||
| b_HeadLampLow | Internal Head Lamp Low activity | ||
| b_HeadLampHigh | Internal Head Lamp High activity | ||
| b_DRLOut | DRL Option activation/deactivation Status | ||
| CAN Communication | C_CANADA_DRLON | CANADA DRL ON Command | |
| C_D_DRL_ON | DEDICATED DRL ON Command | ||
| C_HeadLampLowON | Head Lamp Low On/Off command | ||
| C_HeadLampHighON | Head Lamp High On/Off command | ||
| C_EXTTailON | EXTTail On/Off command | ||
- 2. Head lamp low signal control
- Head Lamp Low control output is ON if HEAD LAMP LOW output is ON by 'Head Lamp Low switch ON ' or 'AUTO LIGHT function'.
- Head Lamp Low control output is OFF when HEAD LAMP LOW output is ON->OFF.
- 3. Head lamp high control
Head Lamp High input and Head Lamp Passing input by M/F is Head Lamp High switch processing for single input same MULTIFUNCTION WIRING DESCRIPTION as Head Lamp High switch only input.
- Head Lamp High Input
When Head Lamp High switch ON that in IGN2 ON and Head Lamp Low control output is ON by IMP, Head Lamp High is consider as input.
- Head Lamp Passing Input
When Head Lamp High switch ON that in IGN2 ON and Head Lamp Low control output is OFF, Head Lamp Passing is consider as input.
- Head Lamp High Input
- 4. Multi-function wiring description